The Pecron E1500LFP takes up to 1,000 W of solar through one solar input (11–60 V, 20 A, 1,000 W). The quickest refill from a maker panel on sale today: 1 × Jackery SolarSaga 500 X, 1 panel on the solar input, which brings it to 500 W and refills its 1,536 Wh in about 3.1 h of full sun.
Solar limit
1,000W
Fastest refill
3.1h of sun
Panels
1× 500 W
The panels cost $799 at Jackery, checked Oct 11, 2026. At a more typical 70% panel yield the refill takes about 4.4 h. Every arrangement here keeps the panels' open-circuit voltage under the limit on a -10 °C (14 °F) morning. Every panel we track.
1 × Jackery SolarSaga 500 X on the Pecron E1500LFP: 1 panel on the solar input; 500 W in.
11 to 60 V open-circuit, 20 A max, 1,000 W, XT60 plug
All inputs together
1,000 W
Two panels in series add their voltages; strings in parallel add their currents. A panel's open-circuit voltage (Voc) rises on cold, bright mornings, so each arrangement below is checked with the panel's own temperature coefficient, or -0.35% per °C where the maker publishes none, at -10 °C (14 °F). Strings in parallel are kept within the input's current figure; a single string that could give more is held back by the input itself.
Every maker panel we track, on the E1500LFP
11 of the 18 panels fit, fastest refill first. Each uses every input that can take it; the hours are full sun, from empty.
Maker panels on the Pecron E1500LFP; prices Oct 11, 2026
"Full sun to refill" is the ideal floor: the station taking its input limit every hour. Panels rarely deliver their rating, so the 70% column is closer to a good day, and a usable day holds four to six hours of full sun in most of the US. Panels whose maker does not name an MC4 plug are counted one to an input, since they link to others only through the maker's own adapters.
Cables between panel and station
Jackery SolarSaga 100 Prime and other panels with the same plug: Anderson on the panel and XT60 on the station, so you need an Anderson-to-XT60 solar cable. Its cable: 9.58 feet.
BLUETTI PV350 and other panels with the same plug: MC4 on the panel and XT60 on the station, so you need an MC4-to-XT60 solar cable. Its cable: 20A MC4 to XT60 Solar Charging Cable (1.5m).
Jackery SolarSaga 40 Air and other panels with the same plug: DC8020 on the panel and XT60 on the station, so you need a DC8020-to-XT60 solar cable. Its cable: Multifunctional Solar Charging Cable (5.9 ft/1.8m).
What a day of sun puts back
Watt-hours back in a day, at a 70% panel yield and the station's input limit. Winter in the northern US gives about 3 hours of full sun, a clear summer day in the Southwest 6 or more.
Watt-hours back per day; the E1500LFP holds 1,536 Wh
Setup
3 h of sun
4 h of sun
5 h of sun
6 h of sun
1 × Jackery SolarSaga 500 X
1,050 Wh68% of the battery
1,400 Wh91% of the battery
1,536 Wha full refill
1,536 Wha full refill
Check another panel on the E1500LFP
Type the figures from the panel's label or spec sheet (they are given at 25 °C). The check assumes MC4 plugs, so panels can go in series or parallel.
Enter the four figures to see how many of these panels the E1500LFP takes, and how to wire them.
Where the solar limits come from
Pecron product page: "XT60 Port: 11V-60V 1000W Max / 20A Max" · "1000W Max Solar Charging (XT60 11V-60V Port)" · "DC5521 Port: Voc 12V~25V / 100W Max /7A Max."
Pecron user manual (PDF): "XT60 Charging Port: PV(operating voltage) range 11V~60V, 1000W maximum; VOC(open circuit voltage) of solar panel/array must be less than 60V, otherwise, it will damage the unit!" · "PECRON E1500 LFP *1 MC4 Solar Charging Cable *1AC Charging Cable*1"
Pecron product page: "E1500LFP+200W Solar kit" · "E1500LFP+ 3*300W Solar kit"
Panel figures: each panel's own page links its maker's spec sheet.
