May we count your visit with Google Analytics? It uses cookies and sends visit data to Google. You can change this any time under Cookie choices. Privacy
The Anker SOLIX S2000 takes up to 400 W of solar through one solar input (11–60 V, 12.5 A, 400 W). The quickest refill from Anker SOLIX's own panels on sale today, with up to 6 panels on an input: 4 × Anker SOLIX PS100 Bifacial, 2 in series × 2 strings in parallel on the solar input, which brings it to 400 W and refills its 2,010 Wh in about 5 h of full sun.
Solar limit
400W
Fastest refill
5h of sun
Panels
4× 100 W
The panels cost $919.96 at Anker SOLIX, checked Nov 17, 2026. The panel's MC4 plug reaches the station's XT60i input through an MC4-to-XT60i solar cable (which cables come in each box). The 4 panels weigh about 25 lb together, and their strings join through a pair of 2-to-1 MC4 branch connectors, sold separately. At a more typical 70% panel yield the refill takes about 7.2 h. Every arrangement here keeps the panels' open-circuit voltage under the limit on a -10 °C (14 °F) morning. Every panel we track.
4 × Anker SOLIX PS100 Bifacial on the Anker SOLIX S2000: 2 in series × 2 strings in parallel on the solar input; 400 W in.
Anker SOLIX S2000: solar input limits from Anker SOLIX
solar input
11 to 60 V, 12.5 A max, 400 W, XT60i plug
All inputs together
400 W
Two panels in series add their voltages; strings in parallel add their currents. A panel's open-circuit voltage (Voc) rises on cold, bright mornings, so each arrangement below is checked with the panel's own temperature coefficient, or -0.35% per °C where the maker publishes none, at -10 °C (14 °F). Strings in parallel are kept within the input's current figure; a single string that could give more is held back by the input itself. We check arrangements of up to 6 panels on one input; some inputs' limits allow a longer string, which needs the panels' maximum system voltage and the cable ratings checked first, so it is not listed here.
Every maker panel we track, on the S2000
15 of the 18 panels fit, fastest refill first. Each uses every input that can take it; the hours are full sun, from empty.
Maker panels on the Anker SOLIX S2000; prices Oct 15 to Nov 17, 2026
Not on this station:Anker SOLIX PS200 Bifacial and Anker SOLIX PS400 (too much voltage, even one panel); Anker SOLIX PS400 Bifacial (Anker SOLIX lists it for this station: its 57.6 V open-circuit voltage is under the 60 V limit on mornings above about 14 °C (57 °F), but reaches about 64.7 V at -10 °C (14 °F), so we leave it out). On a -10 °C (14 °F) morning, the Anker SOLIX PS100 Bifacial does fit: four of them, 2 in series × 2 strings in parallel on the solar input, joined by a pair of 2-to-1 MC4 branch connectors, 400 W.
"Full sun to refill" is the ideal floor: the station taking its input limit every hour. Panels rarely deliver their rating, so the 70% column is closer to a good day, and a usable day holds four to six hours of full sun in most of the US. Panels whose maker does not name an MC4 plug are counted one to an input, since they link to others only through the maker's own adapters.
Cables between panel and station
EcoFlow 110W and other panels with the same plug: MC4 on the panel and XT60i on the station, so you need an MC4-to-XT60i solar cable.
Jackery SolarSaga 100 Prime and other panels with the same plug: Anderson on the panel and XT60i on the station, so you need an Anderson-to-XT60i solar cable. The panel comes with 9.58 feet of cable.
Anker SOLIX PS100 Bifacial: MC4 on the panel and XT60i on the station; the XT60i solar charging cable (0.5 m) in the panel's box joins them. The panel comes with: 2× 8.2 ft (2.5 m) solar charging cable, 1.6 ft (0.5 m) XT60i solar charging cable.
Jackery SolarSaga 40 Air and other panels with the same plug: DC8020 on the panel and XT60i on the station, so you need a DC8020-to-XT60i solar cable. The panel comes with: Multifunctional Solar Charging Cable (5.9 ft/1.8m).
BLUETTI SORA 60: DC5521 on the panel and XT60i on the station, so you need a DC5521-to-XT60i solar cable.
Strings in parallel join through MC4 branch connectors, sold separately in pairs: one for the positive leads, one for the negative, each with an inlet for every string (a 3-to-1 pair joins three). Each input with strings in parallel takes its own pair.
Panels in series need no extra part: each panel's positive MC4 plug clicks into the next panel's negative.
Anker SOLIX does not list a solar cable in the station's own box, so check the panel's box or buy the cable for its plug.
What a day of sun puts back
Watt-hours back in a day, at a 70% panel yield and the station's input limit. In December a panel tilted for winter gets about 2.5 hours of full sun a day in Chicago and 5.3 in Phoenix, by NASA's averages; every city's winter and summer hours.
Watt-hours back per day; the S2000 holds 2,010 Wh
Setup
3 h of sun
4 h of sun
5 h of sun
6 h of sun
4 × Anker SOLIX PS100 BifacialUses an assumed Voc coefficient of -0.35%/°C.
840 Wh42% of the battery
1,120 Wh56% of the battery
1,400 Wh70% of the battery
1,680 Wh84% of the battery
1 × EcoFlow 400W
840 Wh42% of the battery
1,120 Wh56% of the battery
1,400 Wh70% of the battery
1,680 Wh84% of the battery
On sun alone, a full-size fridge draws about 1,170 Wh a day from the battery by our sizing, and 4 × Anker SOLIX PS100 Bifacial puts that back in about 4.2 hours of full sun, so a good day keeps it going.
Does the sun keep up through an outage?
Day by day through an outage that starts at dawn: 4 × Anker SOLIX PS100 Bifacial puts back about 280 Wh for each hour of full sun (a 70% yield, within the station's input limit), and after dark the battery carries the rest. A day that balances on paper can still hide a night that empties it.
Example: a full-size fridge's day, half of it after dark. Type your own figures over it.
On 5 hours of full sun a day, 4 × Anker SOLIX PS100 Bifacial carries this use through all 3 days; the battery is lowest at dawn after night 1, at 71%.
If the first 3 days get only 0.6 hours of full sun each (Chicago's dullest three December days in a row in a typical year), the battery runs empty during day 3 and falls about 980 Wh short over 3 days.
To come through the dull spell as well, it would take about 980 Wh more battery, charged like the station at the start. More panels alone cannot do it: the station's solar input takes at most 400 W.
A Chicago December gives about 2.5 hours of full sun a day to a panel tilted for winter, by NASA's 25-year averages with cloudy days included; pick a city to use its December or June hours (how they are measured). The dull spell is the lowest three days in a row of that month, the middle year of 2001 to 2025 in NASA's daily records, which are for flat ground, so a tilted panel may do a little better. Battery energy a day is what your devices draw from the battery after the inverter's loss; the calculator's figure without its 20% headroom.
The S2000's 2,010 Wh battery, day by day
Day
Sun puts back
Battery at sunset
Battery at the next dawn
Day 1
585 Wh battery full
2,010 Wh 100%
1,425 Wh 71%
Day 2
1,170 Wh battery full
2,010 Wh 100%
1,425 Wh 71%
Day 3
1,170 Wh battery full
2,010 Wh 100%
1,425 Wh 71%
Check another panel on the S2000
Type the figures from the panel's label or spec sheet (they are given at 25 °C). The check assumes MC4 plugs, so panels can go in series or parallel.
Example: the label figures of the BLUETTI PV200, from BLUETTI's spec sheet. Type your own panel's figures over them.
The solar input: 2 in series, 400 W in, 55.2 V open-circuit at -10 °C against the 60 V limit; through an MC4-to-XT60i solar cable. One panel reaches 27.6 V on that morning, by our cautious allowance of -0.35 %/°C, because the coefficient is blank: type your panel's own figure for its exact rise. This is arithmetic on the figures above, not a pairing either maker lists.
Where the solar limits come from
Anker SOLIX product page: "What's in the Box
Anker SOLIX S2000
AC Charging Cable" · "S2000 + 400W Bifacial Solar Panel" · "2,010Wh | Max 400W Solar Input | Fastest Solar Recharging"
Anker SOLIX product page: "XT60i Input 11-60V⎓ 12.5A max.(400W Max)" · "Recharge the power station by connecting the solar panel to the XT60i input port." · "The solar panels, the PV connector to XT60i charging cable, and the solar panel extension cables need to be purchased separately."
Panel figures: each panel's own page links its maker's spec sheet.
The cable in the Anker SOLIX PS100 Bifacial's box: Anker SOLIX's page, read Oct 29, 2026; "What's in the Box: PS100 Bifacial Portable Solar Panel, 2× 8.2 ft (2.5 m) solar charging cable, 1.6 ft (0.5 m) XT60i solar charging cable, quick start guide, and safety card. (Anker's quick start guide AS340QSG: 'PV Connector to XT-60i Charging Cable (0.5m)')"
The cable in the EcoFlow NextGen 220W Bifacial's box: EcoFlow's page, read Oct 29, 2026; "What's in the box: EcoFlow NextGen 220W Portable Solar Panel · XT60i Charging Cable · Protective Bag · Quick Start Guide, Safety Instructions & Warranty Card"
The cable in the EcoFlow NextGen 160W's box: EcoFlow's page, read Oct 29, 2026; "What's in the box: EcoFlow NextGen 160W Portable Solar Panel · XT60i Charging Cable · Protective Bag · Quick Start Guide, Safety Instructions & Warranty Card"