The Allpowers S2000 Pro takes up to 1,000 W of solar through one solar input (12–150 V, 13 A, 1,000 W). The quickest refill from a maker panel on sale today: 3 × BLUETTI PV350, 3 in series on the solar input, which brings it to 1,000 W and refills its 1,451 Wh in about 1.5 h of full sun.
Solar limit
1,000W
Fastest refill
1.5h of sun
Panels
3× 350 W
The panels cost $1,947 at BLUETTI, checked Oct 11, 2026. At a more typical 70% panel yield the refill takes about 2 h. Every arrangement here keeps the panels' open-circuit voltage under the limit on a -10 °C (14 °F) morning. Every panel we track.
3 × BLUETTI PV350 on the Allpowers S2000 Pro: 3 in series on the solar input; 1,000 W in.
Allpowers S2000 Pro: solar input limits from Allpowers
solar input
12 to 150 V, 13 A max, 1,000 W, XT60 plug
All inputs together
1,000 W
Two panels in series add their voltages; strings in parallel add their currents. A panel's open-circuit voltage (Voc) rises on cold, bright mornings, so each arrangement below is checked with the panel's own temperature coefficient, or -0.35% per °C where the maker publishes none, at -10 °C (14 °F). Strings in parallel are kept within the input's current figure; a single string that could give more is held back by the input itself.
Every maker panel we track, on the S2000 Pro
9 of the 18 panels fit, fastest refill first. Each uses every input that can take it; the hours are full sun, from empty.
Maker panels on the Allpowers S2000 Pro; prices Oct 11, 2026
"Full sun to refill" is the ideal floor: the station taking its input limit every hour. Panels rarely deliver their rating, so the 70% column is closer to a good day, and a usable day holds four to six hours of full sun in most of the US. Panels whose maker does not name an MC4 plug are counted one to an input, since they link to others only through the maker's own adapters.
Cables between panel and station
EcoFlow 400W and other panels with the same plug: MC4 on the panel and XT60 on the station, so you need an MC4-to-XT60 solar cable.
Jackery SolarSaga 40 Air and other panels with the same plug: DC8020 on the panel and XT60 on the station, so you need a DC8020-to-XT60 solar cable. Its cable: Multifunctional Solar Charging Cable (5.9 ft/1.8m).
Jackery SolarSaga 100 Prime: Anderson on the panel and XT60 on the station, so you need an Anderson-to-XT60 solar cable. Its cable: 9.58 feet.
Panels in series need no extra part: each panel's positive MC4 plug clicks into the next panel's negative.
Allpowers does not list a solar cable in the station's own box, so check the panel's box or buy the cable for its plug.
What a day of sun puts back
Watt-hours back in a day, at a 70% panel yield and the station's input limit. Winter in the northern US gives about 3 hours of full sun, a clear summer day in the Southwest 6 or more.
Watt-hours back per day; the S2000 Pro holds 1,451 Wh
Setup
3 h of sun
4 h of sun
5 h of sun
6 h of sun
3 × BLUETTI PV350
1,451 Wha full refill
1,451 Wha full refill
1,451 Wha full refill
1,451 Wha full refill
1 × Jackery SolarSaga 200W
420 Wh29% of the battery
560 Wh39% of the battery
700 Wh48% of the battery
840 Wh58% of the battery
Check another panel on the S2000 Pro
Type the figures from the panel's label or spec sheet (they are given at 25 °C). The check assumes MC4 plugs, so panels can go in series or parallel.
Enter the four figures to see how many of these panels the S2000 Pro takes, and how to wire them.
Where the solar limits come from
Allpowers product page: "(12~150)V 13A, 1000W Max" · "1000W Max MPPT. Solar Input" · "Note 1:Product does not include car charger and solar panel cable."
Allpowers user manual (PDF): "Solar Input: (12~150)V 13A, 1000W Max" · "within 150V, the maximum current is 13A, and the maximum charging power is within 1000W."
Panel figures: each panel's own page links its maker's spec sheet.
