The Aferiy P010 takes up to 200 W of solar through one solar input (12–50 V, 8 A, 200 W). The quickest refill from a maker panel on sale today: 1 × BLUETTI PV350, 1 panel on the solar input, which brings it to 200 W and refills its 512 Wh in about 2.6 h of full sun.
Solar limit
200W
Fastest refill
2.6h of sun
Panels
1× 350 W
The panels cost $649 at BLUETTI, checked Oct 11, 2026. At a more typical 70% panel yield the refill takes about 2.6 h. Every arrangement here keeps the panels' open-circuit voltage under the limit on a -10 °C (14 °F) morning. Every panel we track.
1 × BLUETTI PV350 on the Aferiy P010: 1 panel on the solar input; 200 W in.
Two panels in series add their voltages; strings in parallel add their currents. A panel's open-circuit voltage (Voc) rises on cold, bright mornings, so each arrangement below is checked with the panel's own temperature coefficient, or -0.35% per °C where the maker publishes none, at -10 °C (14 °F). Strings in parallel are kept within the input's current figure; a single string that could give more is held back by the input itself.
Every maker panel we track, on the P010
8 of the 18 panels fit, fastest refill first. Each uses every input that can take it; the hours are full sun, from empty.
Maker panels on the Aferiy P010; prices Oct 11, 2026
"Full sun to refill" is the ideal floor: the station taking its input limit every hour. Panels rarely deliver their rating, so the 70% column is closer to a good day, and a usable day holds four to six hours of full sun in most of the US. Panels whose maker does not name an MC4 plug are counted one to an input, since they link to others only through the maker's own adapters.
Cables between panel and station
BLUETTI PV350: MC4 on the panel and XT60 on the station, so you need an MC4-to-XT60 solar cable. Its cable: 20A MC4 to XT60 Solar Charging Cable (1.5m).
Jackery SolarSaga 40 Air and other panels with the same plug: DC8020 on the panel and XT60 on the station, so you need a DC8020-to-XT60 solar cable. Its cable: Multifunctional Solar Charging Cable (5.9 ft/1.8m).
Jackery SolarSaga 100 Prime: Anderson on the panel and XT60 on the station, so you need an Anderson-to-XT60 solar cable. Its cable: 9.58 feet.
What a day of sun puts back
Watt-hours back in a day, at a 70% panel yield and the station's input limit. Winter in the northern US gives about 3 hours of full sun, a clear summer day in the Southwest 6 or more.
Watt-hours back per day; the P010 holds 512 Wh
Setup
3 h of sun
4 h of sun
5 h of sun
6 h of sun
1 × BLUETTI PV350
512 Wha full refill
512 Wha full refill
512 Wha full refill
512 Wha full refill
Check another panel on the P010
Type the figures from the panel's label or spec sheet (they are given at 25 °C). The check assumes MC4 plugs, so panels can go in series or parallel.
Enter the four figures to see how many of these panels the P010 takes, and how to wire them.
Where the solar limits come from
Aferiy product page: "Max 200W, 11.5-50V, Max 8A" · "supports a maximum input voltage of 50V, a maximum input power of 200W, and a maximum input current of 8A" · "It is also compatible with AFERIY solar panels: AF-S200, AF-S100."
Aferiy user manual (PDF): "MPPT input 11.5-50V 8A 200W max" · "In this charging mode, we support solar panel input within 200W, and the input voltage cannot exceed 50V"
Panel figures: each panel's own page links its maker's spec sheet.
