As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Guides · AC or DC
Are solar panels and batteries AC or DC?
BLUETTI (7 stations) and Pecron (3 stations) print the same runtime sum for the AC outlets in each station's manual. It shows where a small load's power goes on those outlets. On the 12 V socket, a device that runs on 12 V skips two steps, the inverter and its own adapter; what the socket itself costs, no maker says.
Free to reuse: copy this diagram with a link to this guide (CC BY 4.0).
What the AC outlets cost, in the makers' own sums
BLUETTI's manual for the Elite 100 mini puts it this way: "Operation time = Battery Capacity × DoD × η ÷ (Load power + Elite 100 mini's Self-consumption)". DoD, the depth of discharge, is the share of the rated charge the station lets you use; η is the inverter's efficiency; the self-consumption is what the station itself draws while it runs, added to your load. The table works each maker's own figures for the device table's 24 W Wi-Fi router, TP-Link's adapter rating for its Archer AX55, with each station's DC ports beside it.
| Station | Depth of discharge | Inverter | Self-consumption | Router on AC | Reaches the router | Car socket | USB-C |
|---|---|---|---|---|---|---|---|
| BLUETTI Elite 10 Mini128 Wh | 95% | over 90% | about 7 W | 3.5 hours | 70%of the usable charge | noneonly a DC5521 barrel port (60 W) | up to 100 W |
| BLUETTI Elite 30 V2288 Wh | 95% | over 90% | about 9 W | 7.5 hours | 65%of the usable charge | 12 V, 10 A | up to 140 W |
| BLUETTI AC50B448 Wh | 90% | over 85% | about 10 Wbelow 300 W only | 10.1 hours | 60%of the usable charge | 12 V, 10 A (120 W) | up to 65 W |
| BLUETTI AC70768 Wh | 90% | over 85% | about 15 Wbelow 300 W only | 15.1 hours | 52%of the usable charge | 12 V, 10 A | up to 100 W |
| BLUETTI Elite 100 mini1,004.8 Wh | 95% | over 90% | about 10 W | 25.3 hours | 64%of the usable charge | 120 W | up to 140 W |
| Pecron E1000LFP1,024 Wh | 95% | over 93% | about 12 W | 25.1 hours | 62%of the usable charge | 12 V, 10 A | up to 100 W |
| BLUETTI Premium 200 V22,073.6 Wh | 95% | over 90% | about 13 W | 47.9 hours | 58%of the usable charge | 12 V, 10 A | up to 100 W |
| BLUETTI Elite 4003,840 Wh | 95% | over 92% | about 15 W | 86.1 hours | 57%of the usable charge | 120 W | up to 100 W |
| Pecron E3800LFP3,840 Wh | 95% | over 93% | about 22 W | 73.8 hours | 49%of the usable charge | 12 V, 10 A | up to 100 W |
| Pecron F5000LFP5,120 Wh | 95% | over 93% | about 30 W | 83.8 hours | 41%of the usable charge | noneonly an XT60 output (12 to 40 V) | up to 100 W |
Router on AC = rated Wh × DoD × inverter ÷ (24 W + self-consumption), each figure the maker's own, linked to its manual; the makers give the inverter as "over" or "typically over" a figure, and none of it is our measurement. "Reaches the router" is the router's share of the usable charge (rated Wh × DoD): inverter × 24 ÷ (24 + self-consumption). BLUETTI's AC50B and AC70 manuals give a second sum without the self-consumption for loads above 300 W. Pecron's E1000LFP manual says 34.7 hours for a 40 W fridge in one sentence and about 17 in the sum under it; the sum is right, at 17.4 hours. Car socket and USB-C are each maker's own ratings for those ports.
Larger stations tend to pass on less of a small load's power, because their own draw is larger. On the Pecron F5000LFP the router gets 41% of the usable charge, because the station's own 30 W is more than the router's 24 W. For a fridge, a TV or a heater the same few watts hardly show.
A Wi-Fi router, worked
The router runs on 12 V: its own adapter turns a wall socket's AC into 12 V DC at up to 2 A (TP-Link's figure for the Archer AX55: 24 W, the most the adapter can supply, so the router's real draw is lower). On a power station's AC outlet that is two conversions: the station's inverter from DC to AC, then the router's adapter back to DC.
BLUETTI Elite 100 mini, by BLUETTI's sum: 1,004.8 Wh × 95% × 90% ÷ (24 W + 10 W) ≈ 25.3 hours
Of the 955 Wh the Elite 100 mini lets you use (95% of 1,004.8 Wh), the router gets 64%; the inverter's loss and the station's own 10 W take the rest. With nothing lost at all, 955 Wh would run 24 W for 39.8 hours: no port gives more than that.
On the 12 V car socket the router skips the inverter and its own adapter. The Elite 100 mini's socket is rated 120 W, 5 times what the router's adapter is rated for; a 12 V car-plug cable with the same plug and polarity as the router's adapter carries it. No maker we read gives an efficiency for its DC ports, so we put no hours on the socket. Whether a station draws less of its own with the AC outlets switched off, these manuals do not say; the standby guide has each maker's figure with nothing plugged in.
A laptop is the other small load that never needs the outlet: the Elite 100 mini's USB-C gives up to 140 W, more than the 40 W a MacBook Air's adapter is rated for (a laptop and a phone on every station). A CPAP can run from the 12 V socket on its maker's own DC converter: for the ResMed AirSense 10 and AirMini, the CPAP page checks each station's socket against ResMed's figure.
Our calculator and runtime pages count every station the same way, 85% of its rated Wh with no self-consumption, which suits a fridge or a heater but gives a small load more hours than these makers' sums do: for the router on the Elite 100 mini, 35.6 hours against BLUETTI's 25.3 hours. Plan a day of the router in the calculator, which opens with it already added: it sizes the day at 814 Wh with its 20% headroom, where BLUETTI's sum needs 955 Wh of the Elite 100 mini's rating. To count the station's own draw, add it as one more device of your own: its maker's self-consumption, for 24 hours. A device on a 12 V or USB cable goes in as your own device on "DC / USB cable", with your own estimate for that path's efficiency, since no maker gives one.
Charging: solar comes in as DC, the wall as AC
A solar panel's cable carries DC straight into the station's solar input, where a charge controller matches it to the battery (Pecron's manuals name a built-in MPPT charge controller). From a wall socket it goes the other way: the station's own charger turns the AC into DC. A car's 12 V socket is DC already. Solar on a house is where AC comes in: an inverter, one on the wall or a microinverter behind each panel, turns the panels' DC into AC for the home, as the US Department of Energy explains. A portable panel needs none: the station is built to take its DC. Which panels fit each station, and the cold-morning voltage check, are in the solar charging guide.
Questions buyers ask
Are solar panels AC or DC?
DC. A solar cell makes direct current; the US Department of Energy describes an inverter as the device that turns DC, "which is what a solar panel generates", into AC (Solar Integration: Inverters and Grid Services Basics). A portable panel's cable carries that DC straight into a power station's solar input.
Is a battery AC or DC?
DC. A battery stores and gives out direct current (Wikipedia on batteries and solar power systems: "both can produce only DC"). That is why a power station needs an inverter for its 120 V outlets and none for its USB and 12 V ports.
Is a power station AC or DC?
Both. Inside, its battery is DC. Its USB-C, USB-A and 12 V sockets give DC, and its 120 V outlets give AC through the inverter. It takes in DC from solar panels and a car's 12 V socket, and AC from the wall, which its own charger turns into DC.
Is it better to use the DC ports?
They take the inverter out of the path (85 to 93% efficient by the makers' own figures), and for a 12 V device its own adapter too. What the DC ports cost instead, no maker we read says, so we cannot say how many more hours you get. Where a device takes DC, check its volts and amps against the port: a 12 V router needs a 12 V socket rated for at least its adapter's amps, and a cable with the same plug and polarity.
Why do the makers add self-consumption to the load?
Because the station draws power of its own while it runs, whatever is plugged in: 7 to 30 W on these 10 stations. For a 1,000 W heater that hardly shows. For a 24 W router it is 23 to 56% of the watts in the sum (the router's plus the station's own). BLUETTI's AC50B and AC70 manuals add it only for loads below 300 W.