As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Anker SOLIX · home battery
Anker SOLIX E10: what each system costs, and how long it runs a home
The E10 is a home battery you mount on a wall or the floor, not a portable station: a 60.6 lb power module giving 7,680 W at 120/240 V, and 130 lb B6000 batteries of 6.1 kWh each, up to 5. Anker sells one module with one battery for $4,299 ($700 per kWh, read Nov 4, 2026). Powering your house circuits adds the Smart Inlet Box ($4,599 together) or the 200 A Power Dock, and an electrician. With one battery it costs more per kWh than any of the 9 portable stations with a 240 V outlet we track; the E10 with five batteries comes to $400, less than any of them.
How long would it run your home?
Example: the average US home, 29.6 kWh a day (EIA). Type your own over it: the kWh on your electric bill divided by the days the bill covers.
On 29.6 kWh a day, the one-battery E10 (6.1 kWh) carries about 4 hours; the largest system Anker lists, three E10s with two batteries each and the Power Dock (36.9 kWh), carries about 25 hours.
| System | Battery | Output at 120/240 V | How it powers the house | Price at Anker | Per kWh | Runs your day |
|---|---|---|---|---|---|---|
| E10 with one battery, trolley and 120/240 V power strip | 6.1 kWh | 7,680 W | No house wiring: a 120/240 V power strip on a trolley; plug appliances in | $4,299 | $700 | about 4 hours |
| E10 with one battery and the Smart Inlet Box | 6.1 kWh | 7,680 W | Smart Inlet Box: wired to your panel by an electrician, up to 40 A from the E10's backup port | $4,599 | $749 | about 4 hours |
| E10 with one battery and a transfer switch | 6.1 kWh | 7,680 W | A transfer switch: wired to your panel by an electrician, for the circuits connected to it | $5,049 | $822 | about 4 hours |
| E10 with two batteries | 12.3 kWh | 7,680 W, 10,000 W for 90 min | Battery and power module only: add a connection | $6,299 | $513 | about 8 hours |
| E10 with two batteries and the Smart Inlet Box | 12.3 kWh | 7,680 W, 10,000 W for 90 min | Smart Inlet Box: wired to your panel by an electrician, up to 40 A from the E10's backup port | $6,599 | $537 | about 8 hours |
| E10 with two batteries and the Power Dock | 12.3 kWh | 7,680 W, 10,000 W for 90 min | Power Dock: 200 A whole-home, switches over by itself, 12 smart circuits, up to 3 E10s | $7,799 | $635 | about 8 hours |
| Two E10s with one battery each and the Power Dock | 12.3 kWh | 15,360 W | Power Dock: 200 A whole-home, switches over by itself, 12 smart circuits, up to 3 E10s | $10,098 | $822 | about 8 hours |
| E10 with three batteries | 18.4 kWh | 7,680 W, 10,000 W for 90 min | Battery and power module only: add a connection | $8,299 | $450 | about 13 hours |
| E10 with three batteries and the Power Dock | 18.4 kWh | 7,680 W, 10,000 W for 90 min | Power Dock: 200 A whole-home, switches over by itself, 12 smart circuits, up to 3 E10s | $9,799 | $532 | about 13 hours |
| E10 with four batteries | 24.6 kWh | 7,680 W, 10,000 W for 90 min | Battery and power module only: add a connection | $10,299 | $419 | about 17 hours |
| Two E10s with two batteries each and the Power Dock | 24.6 kWh | 15,360 W, 20,000 W for 90 min | Power Dock: 200 A whole-home, switches over by itself, 12 smart circuits, up to 3 E10s | $14,098 | $574 | about 17 hours |
| E10 with five batteries | 30.7 kWh | 7,680 W, 10,000 W for 90 min | Battery and power module only: add a connection | $12,299 | $400 | about 21 hours |
| E10 with five batteries and the Power Dock | 30.7 kWh | 7,680 W, 10,000 W for 90 min | Power Dock: 200 A whole-home, switches over by itself, 12 smart circuits, up to 3 E10s | $13,799 | $449 | about 21 hours |
| Three E10s with two batteries each and the Power Dock | 36.9 kWh | 23,040 W, 30,000 W for 90 min | Power Dock: 200 A whole-home, switches over by itself, 12 smart circuits, up to 3 E10s | $20,397 | $553 | about 25 hours |
Battery is Anker's 6.144 kWh per B6000. "Runs your day" spreads your daily kWh over 24 hours and counts 15% for the inverter, as every runtime on this site does; Anker publishes no usable-capacity figure. Output is Anker's continuous rating, 7,680 W per power module, and its 10,000 W boost for up to 90 minutes where a module has two or more batteries. Prices exclude installation and solar panels. Bought alone: power module $2,499, battery $2,499, Smart Inlet Box $399, Power Dock $1,999.
The essentials alone, a full-size refrigerator, a Wi-Fi router, phone charging and lights as our home backup page sizes them, draw about 1.9 kWh a day from a battery: about 3.2 days on one B6000. Central air, an electric range, a water heater or an EV charger is what turns days into hours, and the E10's 7,680 W is shared by everything running at once.
The three ways to connect it, and what each needs
- Power strip only ($4,299 with one battery and a trolley): no wiring. You plug appliances into its 120 V and 240 V outlets, as you would with a portable station.
- Smart Inlet Box ($399 alone, $300 more in Anker's bundle): wired beside your panel, with a backup port to power the house (up to 40 A from the E10) and an on-grid port to charge from the grid. Anker's own installation service costs $1,350.
- Power Dock ($1,999 alone): a 200 A automatic transfer switch for the whole panel (160 A continuous), with 12 smart branch circuits and room for up to 3 E10s. Anker says it "must be installed by certified installers or electricians who have completed the Anker SOLIX Power Dock product training"; its own service costs $2,500.
None of them sends power back to the grid. Asked whether the E10 or the Power Dock does, Anker answers: "No, neither supports feeding electricity back to the grid." The E10 can still charge when grid power is cheap and run the house when it is dear, which is what Anker's savings claims rest on.
The numbers Anker gives
- Starting a motor: 120 A locked-rotor current with one battery, 155 A with two or more, 275 A from two E10s; check your air conditioner's LRA on its nameplate. Why starting matters: surge vs running watts.
- Charging: 7,680 W from a 240 V circuit, 1,800 W from a 120 V outlet, 4,500 W from Anker's DC generator; the grid or a generator can also pass 9,600 W straight through.
- Solar: 2 inputs of 4,500 W each, 30 to 450 V and 15 A. That window suits strings of rooftop or ground-mounted panels; for folding panels, see solar panels.
- Lifespan: 80% of the capacity after 4,000 cycles, about 11 years of one full cycle a day; 5-year warranty on the module and batteries, 10 years on the Smart Inlet Box and Power Dock.
- Weather: NEMA 4 (IP66), -4 °F to 131 °F. Below a battery temperature of 59 °F it charges slowly while a heating film warms the cells.
- Weight: 60.6 lb for the power module and 130 lb for each battery, so a one-battery E10 is about 191 lb.
From Anker's E10 page, Smart Inlet Box page and Power Dock page, read Nov 4, 2026.
Against the portable stations that give 240 V
The same job, a battery that feeds a panel at 120/240 V, can be done by the larger portable stations, which roll indoors and work on their own outlets too. Per kWh of the station alone, they cost $429 to $694, against the E10's $700 with one battery and $400 for the E10 with five batteries, its cheapest per kWh: each added battery is the cheap part. Each needs its own maker's home panel or a transfer switch to power house circuits, as the E10 does. What the E10 adds is an outdoor rating, a 200 A whole-home switch and 9,000 W of solar per module.
| Station | Battery | At 240 V | Price | Per kWh |
|---|---|---|---|---|
| Pecron F5000LFP | 5.1 kWh, up to 35.8 kWh | 7,200 W | $2,199checked Nov 3, 2026 | $429 |
| BLUETTI Apex 300 | 2.8 kWh, up to 19.4 kWh | – | $1,499checked Nov 17, 2026 | $542 |
| Jackery HomePower 3600 Pro Max | 3.6 kWh, up to 21.5 kWh | 4,000 W | $2,099checked Nov 17, 2026, sold out when read | $586 |
| OUPES Guardian 6000 V2 | 4.6 kWh, up to 41.4 kWh | 6,000 W | $2,699checked Oct 15, 2026 | $586 |
| Anker SOLIX F3800 Plus | 3.8 kWh, up to 26.9 kWh | – | $2,399.99checked Nov 17, 2026, sold out when read | $625 |
| EcoFlow DELTA Pro Ultra X | 12.3 kWh, up to 61.4 kWh | – | $7,999checked Nov 2, 2026 | $651 |
| EcoFlow DELTA Pro 3 | 4.1 kWh, up to 12 kWh | – | $2,799checked Nov 17, 2026, sold out when read | $683 |
| EcoFlow DELTA Pro Ultra | 6.1 kWh, up to 30 kWh | – | $4,199checked Nov 17, 2026, sold out when read | $683 |
| Jackery Explorer 5000 Plus | 5 kWh, up to 60 kWh | 7,200 W | $3,499checked Nov 3, 2026, sold out when read | $694 |
Station prices are each maker's own, from our weekly read; the E10's are Anker's, read Nov 4, 2026. A dash under "At 240 V": the maker gives no separate rating for the 240 V outlet. Home backup sizes a station for an outage, and extra battery or second station weighs the ways to add kWh later.
Anker's smaller route: the F3000 and the Power Saver Kit
Anker's Power Saver Kit is a smart meter and a Bi-Directional Inlet Box for the F3000, a 3,072 Wh portable station. Wired beside your panel, the inlet box lets the F3000 charge from the grid or solar and feed the house in return; Anker says it "prevents energy from feeding back to the grid". One F3000 gives 120 V only: "F3000 only provides 120V output by itself. For 240V output, connect two F3000s together with a double voltage hub." Anker sells the kit alone for $129.99, less than the Bi-Directional Inlet Box alone at $289.99, to add to an F3000 you already own.
| Bundle | Battery | Price at Anker |
|---|---|---|
| F3000 with the Power Saver Kit | 3,072 Wh | $1,828.99 |
| F3000 with the Power Saver Kit and a transfer switch | 3,072 Wh | $2,859.99 |
| Two F3000s with the Power Saver Kit | 6,144 Wh | $4,479.99 |
| Two F3000s with the Power Saver Kit and a transfer switch | 6,144 Wh | $5,269.99 |
From Anker's F3000 and Power Saver Kit page and its bundle pages, read Nov 4, 2026. The F3000's own price, checked weekly, is on its page.
Questions buyers ask
How much does the Anker SOLIX E10 cost?
$4,299 at Anker for the power module and one 6.1 kWh B6000 battery, with a trolley and a 120/240 V power strip (read Nov 4, 2026). Wired to your panel it is $4,599 with the Smart Inlet Box, before the electrician; Anker's own installation service for the box is $1,350. Each extra battery adds $2,000 in Anker's bundles or $2,499 bought alone.
How many kWh is the Anker SOLIX E10?
6.1 kWh per B6000 battery (Anker: "E10 supports up to 5 battery modules, each with a maximum capacity of 6.144kWh."). One power module takes up to 5, 30.7 kWh, and a Power Dock takes up to 3 power modules, which is how Anker reaches its 90 kWh headline.
Is the Anker SOLIX E10 portable?
Not in the sense of the stations on this site: the power module weighs 60.6 lb and each battery 130 lb, and it is made to be mounted on a wall or the floor, indoors or out: Anker rates it NEMA 4 (IP66). Anker sells a $249 trolley to roll a one-battery E10.
Does the E10 need an electrician?
To power house circuits, yes: the Smart Inlet Box, a transfer switch or the Power Dock is wired into your panel, and Anker says the Power Dock "must be installed by certified installers or electricians who have completed the Anker SOLIX Power Dock product training". Without one, the E10 runs what you plug into its power strip.
Can the Anker SOLIX E10 sell power back to the grid?
No. Asked whether the E10 or its Power Dock feeds electricity back to the grid, Anker answers: "No, neither supports feeding electricity back to the grid." It can charge from the grid when power is cheap and run the house when it is dear.
How long will an Anker SOLIX E10 run a house?
On 29.6 kWh a day, the one-battery E10 (6.1 kWh) carries about 4 hours; the largest system Anker lists, three E10s with two batteries each and the Power Dock (36.9 kWh), carries about 25 hours. That is the average US home's 29.6 kWh a day (EIA), counting 15% for the inverter. The essentials alone, a full-size refrigerator, a Wi-Fi router, phone charging and lights, draw about 1.9 kWh a day and last about 3.2 days on one battery.